Preheat 510 battery for CBD cartridge



Please set the video preferred quality to 1080P or 720P. 400mah capacity 5 clicks to turn ON/OFF 2 clicks to preheat and hold for 15 seconds 3 clicks to adjust …

21 Comments

  1. I want to see at least one video or someone shows you how to actually use the thing all you bastards keep doing it show you how to press the buttons but I ain't seeing no smoke just like with my no goddamn smoke

  2. ⚠️⚠️⚠️LISTEN! If your pen doesn’t Work you’ve tried EVERYTHING (like I did) then this is your sign to get your pliers and take your 510 battery pen Apart. Take your pliers and slightly take your 510 thread out. It will be tight. (the metal piece that connects with your cartridge) BE CAREFUL to not PULL HARD YOU WILL DISCONNECT THE WIRES. most commonly it’s Red and Black wire. That will make you take out everything, which that is the little chip with the color lights, the button, and the actual Battery that may have yellow tape. What I found out why my Battery wasn’t working was because the under the Little battery the black wire was disconnected cut. I carefully stripped the black wire, then Grabbed some Small squares of thin foil, and stuck it inside down the empty case (that being your empty 510 battery container) when the black wire on the bottom of the little battery is stripped, I make sure it will touch the foil. Then put berthing back in carefully. Well this was my little 30 min surgery I did to not waste 30$ again and it was completely worth it.

  3. ⚠️⚠️⚠️LISTEN! If your pen doesn’t Work you’ve tried EVERYTHING (like I did) then this is your sign to get your pliers and take your 510 battery pen Apart. Take your pliers and slightly take your 510 thread out. It will be tight. (the metal piece that connects with your cartridge) BE CAREFUL to not PULL HARD YOU WILL DISCONNECT THE WIRES. most commonly it’s Red and Black wire. That will make you take out everything, which that is the little chip with the color lights, the button, and the actual Battery that may have yellow tape. What I found out why my Battery wasn’t working was because the under the Little battery the black wire was disconnected cut. I carefully stripped the black wire, then Grabbed some Small squares of thin foil, and stuck it inside down the empty case (that being your empty 510 battery container) when the black wire on the bottom of the little battery is stripped, I make sure it will touch the foil. Then put berthing back in carefully. Well this was my little 30 min surgery I did to not waste 30$ again and it was completely worth it.

  4. the most confusing and complicated device ever invented. Click 5 times to turn on/off. Yeah? Which is it, because I don't see how you know ON from OFF. Nothing about how to use it. Just on/off, preheat, different voltages. Ok; now you want to use the damn thing: what do you do??

Leave a Reply

Your email address will not be published.


*