How to Make CBD E-liquid (Safe & 100% Legal)

letsmix DIYorDIE, Walker Vapor Group LLC, or any of its associates, do NOT condone, nor encourage the use of CBD or any mood altering substances without …


  1. Question, would a 50/50 premix of PG/VG work as a solution to dissolve the isolate? I've been trying to get a solution of 50ML/40MG per dose? I'm spending a fortune on CBD premixed and doing it that way..and I can get the isolate for 2/3 what I'm paining on boosters.

  2. Could I skip all the mixing? Could I just use an already finished favorite flavor of mine (VG 70 / PG 30) warm it up a bit and add the CBD crystals? Or isnt possible at all with VG already in the mix?

  3. there are some people that are mixing the cbd firstly with vg and later on with pg. I have no vg and pg seperated, i have a bottle with 50% vg and 50% pg. Can i mix in the cbd in this base?

  4. I was hoping to get a 60 vg to 40 pg mix. Is this possible with 1000 mg of CBD isolate and a 30 ml bottle? I've read online that 70 pg to 30 vg is all I can achieve with isolate without crystallization but I don't understand how others are doing it.

  5. I've purchased 15 ml bottles that have 4,500 mg of cbd, so in other words I should add 9 grams of isolate mix with a couple drops of tarpene heat up and mix, then add PG heat it up and mix, then add vg and heat it up and mix and it should be good right?

  6. You're awesome for making these vids. You've helped get me on DIY. Ive been a fan of Sang Petillant since I started DIY about a year ago. In my tank now. Ive been curious about making my own CBD vape so I also appreciate this vid. I wanted to drop a comment to say, when I vape a CBD flower, minutes later Ill hit the Sang Petillant, I swear it enhances and extends the taste of the flower as if it were the freshest/cleanest way to vape the flower. Anyone else?

  7. Getting into diy cbd thanks to pmta. This video never went over why you chose 50/50 ratio for your mix. I'm also a little confused why the nic base on the recipe is 100% vg instead of pg. Guess I'll go hunting for the stream this was clipped from.

  8. what is the most cbd isolate i can put in a 10ml of pg/vg and what ratio would the pg/vg have to be
    do you think its possible to create a juice that has 4000mg per 10ml without the juice crystalizing down the line

  9. I was going to make some of this until I realized the ridiculous amount of e-juice I would have to consume to get my medical dose. I mainly dab cbd isolate/shatter/waxes etc and I also smoke cbd buds and take a tincture that I make. I use about 150mg per session of 99% for my pain and anxiety. Even at 2000mg per 30mL we are talking about only 66mg per mL! To get to 150 I would need to sit there and vape almost 3 mL. That's like half a teaspoon of carrier in my lungs! No thanks… I'll just pack a cbd flower bowl in the double honeycomb percolator and melt some isolate on top! Good instructional video though for people with small tolerances or who just want to try cbd.
    I would recommend people just getting into cbd to start with the pure form and skip e-liquids. A good starting dose for pain relief is 50mg dabbed or vaporized in a glass oil bulb pipe(the meth pipe looking ones. Before tweakers started using those for tweak it was designed for hash oils.)
    CBD concentrates work very nicely and are super smooth in oil bulb pipes. I have an oil bulb attachment for my double honeycomb percolator and it's the smoothest hit I have ever had!

  10. I've bought products that were 350mg / ml. That's 10,500mg per 30ml bottle. So either they are lying or you are off by a factor of 10 from the max concentration.

  11. I use Cannabis Medically and am very interested in vaping it rather than the drops. I wonder which terpenes are best for pain. I wanna DIY my own CBD/THC ejuice. I'm poor and my medical benifits doesn't cover much………AND they make us get it exclusively from ONE company which is SO expensive. Complete rip off.

  12. What if I already have a 70/30VGPG and cbd crystals?
    Can I just add them and shake it daily for a week and it would dissolve?

    Or one shots. 120ml bottles with the flavorings which you add your 70/30 base to it. Europe style.
    Should I just add the crystals, wait to dissolve and then add the base? I mean, yes that's the way to do it… But I'm more curious if it will dissolve in an already 70/30 liquid.

  13. Sorry but the statement about not adding terpenes to THC concentrates is false. Adding terps to THC distillate and C02 oil is extremely common, in fact pretty much the majority of vape cartridges on the market today (legit and black market) have had terpenes added back in. I also personally have a decent little collection of terps that I use to make my own distillate cartridges. Besides THC, C02 oil and distillate are stripped of all their cannabinoids and terpenes and extracted into extremely pure THC (distillate can be 90%+). C02 and distillate by themselves are extremely bland so it's common practice to add terpenes back into the oil when making cartridges. Aside from just flavor and aroma, there's also science that supports the idea that terpenes synergize with the THC to create unique, therapeutic effects depending upon the terp profile.

    People also use terpene "liquifying" blends to liquidize solid concentrates such as shatter, wax, and even rosin to make vape cartridges. Unlike C02 oil or distillate, shatters and waxes still have some of their natural terpenes and cannabinoids but some are lost during extraction. The new jam right now is HTFSE (high terpene full spectrum extracts) and HCFSE (high cannabinoid full spectrum extracts). They're basically able to strip all of the impurities out of cannabis while keeping the natural full spectrum of cannabinoids and terpenes intact. With these types of extracts it definitely wouldn't make sense to add any additional terpenes.

    BTW I'm mixing my first experimental 10ml batch of CBD e-liquid right now. I added the PG and two drops of peach sorbet terpenes (free sample from Mass Terpenes). I may add more but you never want to overdo it with the terps because they are potent! Best to start low and work your way up. Once I figure out my terpene ratio I might try dissolving the crystals into the terpenes first and then adding the PG because terpenes are a natural solvent. This is my first go at this so I have much experimenting to do. If I decide to make bigger batches I'll definitely pick up the vortexer using your link. ✌️& ❤️

  14. We nab those small plastic ketchup cups from Wendy's and weigh out isolate in them. Bend it a little and dump right in the bottle. Also..a few second in the microwave is much quicker than dealing with boiling water to break down the isolate. Actually the microwave works great for helping mix juices too.Kinda surprised you never do it. Been doing at the shop for 6 years. Hope it helps Wayne! Keep it up!

Leave a Reply

Your email address will not be published.